Add DPU IP into Repository or Upgrade DPU from a Previous Version

In the Vivado Integrated Design Environment (IDE), click Project Manager > IP Catalog. In the IP Catalog tab, right-click and select Add Repository (see figure below), then select the location of the DPU IP.

Figure 1: Add Repository

The DPU IP will appear in the IP Catalog page.

Figure 2: DPU IP in Repository

If there is an existing hardware project with an old version of the DPU, upgrading to the latest version is required, follow these steps:

  1. Delete the old DPU IP in the block design and IP repository.
  2. Add the new DPU IP into the IP repository.
  3. Add the new DPU IP into the block design.