UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 10236

3.1i Foundation ISE, Project Navigator - "Exit Code 0001" caused after changing constraints.

説明

Keywords: Project Navigator, ISE, 0001, XST, VHDL

Urgency: Standard

General Description:
An "Exit Code 0001" is caused by the following sequence of steps:

1. Implement the design.
2. Open the Constraints Editor and makes a valid change to the constraints.
3. Save and Exit Constraints Editor.
4. Re-implement the design with the new constraints.

ソリューション

1

This problem is fixed in the latest 3.1i Service Pack available at:
http://support.xilinx.com/support/techsup/sw_updates. The first
service pack containing the fix is 3.1i Service Pack 6.


2

If Service Pack 6 has not been installed the workaround is to run XST
via command line. The following two environment variables need to be set:

set XST_EXE=c:\xilinx\bin\nt\xst.exe
set XST_HOME=c:\xilinx\data\hdlsynthesis\nt

Then, from the project directory in the DOS prompt, you can run:

xst -ifn filename.xst

At this point the design can be run through Design Manager.
AR# 10236
日付 01/15/2003
ステータス アーカイブ
種類 一般
このページをブックマークに追加