UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1068

Foundation: Importing a Viewlogic design with a user library

説明

Keywords: Viewlogic, Foundation, User library

Urgency: Standard

General Description: User-created macros for most Viewlogic designs
reside in the project directory, or "primary" library. However, some users
or companies store frequently-used macros in a separate directory
(referred to here as a "non-primary user library"). This directory is
referenced in the viewdraw.ini as a read-only [r] or read-write [w] library.

When importing a Viewlogic design, the Foundation tools look
only in the primary library for user-created macros. If the macro is
not found in the primary library, a warning is issued and there will
be a blank space in the design.

How can this be avoided?

ソリューション

The solution is to import the required macro schematics from
the non-primary user library before importing the main
design.

Example: The main design is C:\PROSER\TOP, and it uses
macros called 7BIT_REG and MULT_8X8 from C:\MYLIBS\LIB1.

1. Start the Foundation Schematic Editor and select File ->
Import ViewLogic Schematic.
2. Browse to C:\MYLIBS\LIB1\SCH and use CTRL-click to select
7BIT_REG.1 and MULT_8X8.1. Click OK to import these
schematics.
3. Select File -> Import ViewLogic Schematic again.
4. Browse to C:\PROSER\TOP\SCH, and select TOP.1. Click OK
to import the design.
AR# 1068
作成日 06/21/1996
最終更新日 08/11/2003
ステータス アーカイブ
タイプ 一般