UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 109

PROcapture - Do not remove the security key during the middle of a session

説明

Keywords: PROcapture, security, key

Urgency: Standard

General Description:
Because PROcapture checks for proper security each time a file is saved or a component is added, the security key must not be removed from the parallel port.

If the key is removed, and the user attempts to save the file, the following message will be reported:

"WORKVIEW: SECURITY: No valid license found for product: PRO Series"

The message will be displayed on the message line, just above the PROcapture command line.

Additionally, if a user attempts to add a component without the security key attached, the same message will appear, and an empty box will be placed on the schematic in place of the desired component.

ソリューション

Once the security key has been removed, nothing can be done to return PROcapture to its initial state. Replacing the key will allow you to save the schematic or symbol, but you will no longer be able to add any components.

If you have removed the key, replace it and save the schematic. Once you have saved all your files, exit PROcapture and restart.
AR# 109
作成日 08/31/2007
最終更新日 02/24/2003
ステータス アーカイブ
タイプ ??????