UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11084

Virtex - DLL does not lock in Hot-Swap applications

説明

In a Hot-Swap application, the DLL will not lock. However, if the clock is stopped and restarted, or if the device is reconfigured after the board is plugged-in, the DLL will lock. It will also lock if the board is powered up normally (not Hot-Swapped).

ソリューション

In a Hot-Swap application, the reset pin of the DLL should be used. It should be tied to the global reset or another signal that will reset the DLL on power-up.

AR# 11084
日付 05/14/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加