General Description: When I try to program a device with JTAG Programmer, the following warning appears:
"Cannot definitively confirm status of chip. Verify that DONE went high manually."
JTAG Programmer is unable to read the status of the DONE pin if the security bits are set. To determine whether the security bits are set, open the "design.bgn" file and look for the following flag: -g Security:<value>
For JTAG Programmer to detect the status of the DONE pin, the flag must be set to "none": -g Security:none
The other settings, which will prevent JTAG Programmer from reading the status of the DONE pin, are: -g Security:LEVEL1 -g Security:LEVEL2