We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 11957

3.1i Timing Analyzer - Selecting the "reg_sr_q" option has no effect if the tool was previously run without this option


Keywords: Timing Analyzer, reg_sr_q, asynchronous, reset

Urgency: Standard

General Description:
To analyze the path to a register's asynchronous reset pin in a custom analysis, I must enable the "reg_sr_q" option in the "Path Tracing" tab. However, if a previous analysis was run without this option selected, subsequent analysis runs will proceed as though the option was not enabled (regardless of whether or not the option is actually enabled).


This problem is currently under investigation.

To work around this issue, close the Timing Analyzer. When you reopen it, and be sure to enable "reg_sr_q" on the first analysis run.
AR# 11957
日付 08/21/2002
ステータス アーカイブ
種類 一般