UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1199

5.x LCA2XNF - Warning:23 pins do not have routing delays, PPR shows 0 unroutes

説明

While running LCA2XNF, you may get a message like this:
WARNING 23: 3 of 965 pins do not have routing delays.
Unit delay model will be generated.

ソリューション

One possible cause of this is having save sig attributes on
the nets used in the design. PPR will say the the design
is fully routed after warning of sourceless nets:

*** PPR: WARNING 9906:
Net "TRACK/MISC_5" has no source.
*** PPR: WARNING 9906:
Net "TRACK/-MISC_6" has no source.
*** PPR: WARNING 9906:
Net "TRACK/MISC_7" has no source.
...

1996/09/03 16:49:28 .... Improving circuit performance.

Design has 0 unroutes.

and all the nets will be routed but not all the pins. In this
case, since there was no source, the pin exists but there is no
net to route. PPR is happy and claims 0 unroutes, but xdelay
will point out the pins are unrouted:

Searching for delay paths...
Warning: There are unrouted pins. Timing results may be incomplete.

To solve this remove the save sig attribute from the nets in the
design. If this isn't possible attach them to either vcc/gnd as
needed and add an "x" attribute to preserve them.
AR# 1199
作成日 08/31/2007
最終更新日 03/22/2000
ステータス アーカイブ
タイプ ??????