AR# 1236: Foundation - BTRIEVE 1002 or memory allocation error occurs on XC4000E project
AR# 1236
Foundation - BTRIEVE 1002 or memory allocation error occurs on XC4000E project
説明
Keywords: BTREIVE, memory allocation, XC4000E
Urgency: Standard
General Description: After upgrading from Foundation 6.0.0 to Foundation to 6.0.1, creating or opening an XC4000E design may cause the Project Manager to report a memory allocation error or BTRIEVE 1002:
"Can't find lib_dir."
ソリューション
1
Some files may not have been correctly updated when the update was installed.
To ensure that all files are correctly updated, you must uninstall Foundation, then reinstall it from the 6.0.1 CD. (You do not have to reinstall the XACTstep software.)
Run the Uninstall program from the Foundation program group (or run ACTIVE\EXE\UNINSTAL.EXE) to remove the current Foundation software from your PC. Select "Delete all applications and files except PROJECTS directory". This will save your existing projects. Allow the uninstaller to remove the keylock driver and the BTRIEVE files when it prompts you.
Now insert the Foundation 6.0.1 CD and run the installation.
2
(For Windows 3.x only)
There might not be enough conventional memory available.
To check the available conventional memory:
1. Open an MSDOS session. 2. Type "mem /c | more".
If the conventional memory is < 500kB, reduce the number of TSRs loaded by the CONFIG.SYS and/or AUTOEXEC.BAT so that there is 500kB or more of conventional memory free. Some TSRs can also be loaded into upper memory to free up conventional memory.