We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1240

XKEY 5.2 under Windows 3.11 does not see the key, but works fine under DOS.


There is only the Xilinx key on the parallel port.
XKEY 5.2 under DOS reads the key on the parallel port but XKEY under
Windows does not.



There is a conflict with a windows driver on lpt1/lpt2.
This problem has been reported when the HP laserjet 5L driver is installed on the same port than the Xilinx key.

The workaround is to disable this driver.


It has been reported that loading in the driver for 5M fixes the problem


A solution to getting the HP6P printer to work with the xilinx key is installing the driver in EPP (Enhanced Parallel Port) Mode .
AR# 1240
作成日 08/31/2007
最終更新日 10/07/2008
ステータス アーカイブ
タイプ 一般