UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12570

4.1i ISE Project Navigator - Enabling local feedback results in an error that includes "cpldfit.tcl - Done: failed with exit code: 65535."

説明

Keywords: 4.1i, Project Navigator, CPLDFit, TCL, feedback, 65535, localfbk

Urgency: Standard

General Description:
For the XC9500 flow (only), the "Pin Feedback" and "Local Macrocell Feedback" options are set as "Template-Controlled" by default. However, if I click on these settings, I am also able to select "On" or "Off" for each setting.

If I set either setting to "On", Project Navigator stops running and reports a TCL error similar to the following:

"Starting: 'exewrap -mode pipe -tapkeep -tcl -command _cpldfit.tcl'

Creating TCL Process
The TCL interpreter reported the following error when executing the script _cpldfit.tcl
invalid command name "else"
while executing
"else { puts $_rspFileHandle "-localfbk" }"
(file "_cpldfit.tcl" line 14)Done: failed with exit code: 65535."

ソリューション

This problem is fixed in the latest 4.1i Service Pack, available at:
http://support.xilinx.com/support/techsup/sw_updates
The first service pack containing the fix is 4.1i Service Pack 3.
AR# 12570
日付 08/11/2003
ステータス アーカイブ
種類 一般
このページをブックマークに追加