We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 12707

EXEMPLAR - When I target a CoolRunner, the number of macrocells used is unusually high


Keywords: Leonardo, Exemplar, CoolRunner, XCR, macrocell

Urgency: Standard

General Description:
When I run synthesis for a CoolRunner device, the macrocell count may be noticeably higher than it would be for other CPLDs (Xilinx or non-Xilinx).


This is a reporting error in Leonardo Spectrum that occurs in version 2001.1b and later. If you take the netlist from Leonardo and implement it, you should receive a lower macrocell count. However, due to a libraries issue, you will need to target a 9500 series CPLD, then fit the netlist to a CoolRunner part. (Please see (Xilinx Answer 12977) for further information on this.)
AR# 12707
日付 04/20/2007
ステータス アーカイブ
種類 一般