UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1388

XABEL/FOUNDATION: What is needed to compile a design containing XABEL blocks

説明

To be able to compile a design containing XABEL blocks in Foundation,
you will need to install the following:

For FPGA and/or XC7000 designs:
1. The Foundation package (schematic entry, HDL Editor, and
simulation)
2. XABEL (DS371). This may be installed from either the
Foundation CDROM or from the XACTStep CDROM.
3. XACTStep 6

For XC9500 designs:
1. The Foundation package V6.0.1 (schematic entry, HDL Editor,
and simulation)
2. XABEL (DS371). This may be installed from either the
Foundation CDROM or from the XACTStep CDROM.
3. XACT-CPLD (DS560)

This will allow you to enter and synthesize the ABEL design,
implement the design, and also do a timing simulation in
Foundation after the design has been implemented.



ソリューション

AR# 1388
作成日 10/18/1996
最終更新日 03/08/2000
ステータス アーカイブ
タイプ 一般