We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14394

11.1 Schematic - Non-English international characters are not accepted in schematic signal names or as text messages on a schematic


Net names that contain "non-English" characters such as accents, umlauts, or cedillas are not accepted in ECS.


When these characters are used, the schematic editor reports that they are illegal. You can work around this problem by using names that do not include these special characters. 


In some cases, the schematic editor has allowed schematics using these special characters to be saved; later, however, the schematics cannot be opened. If this is the case, work around the problem by opening the schematic in a text editor and modifying the names to remove the special characters. After you save the schematic, you will be able to open it in the schematic editor.

AR# 14394
日付 05/14/2014
ステータス アーカイブ
種類 一般