We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14458

Virtex-II/-II Pro Configuration - BUSY asserts during SelectMAP configuration with a DES encrypted bitstream


When I perform a SelectMAP configuration with an encrypted bitstream, BUSY asserts at a lower speed than the 66 MHz specification. What is the reason for this?


Extra processing time is needed when the bitstream is encrypted. Consequently, BUSY handshaking is required for encrypted bitstreams at a lower speed than for non-encrypted bitstreams. 


The maximum speed at which a Virtex-II/-II Pro device can be configured via SelectMAP without BUSY handshaking is 5 MHz.

AR# 14458
日付 05/14/2014
ステータス アーカイブ
種類 一般