We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14606

Virtex-II Pro RocketIO - How do I perform clock correction on a multiple comma sequence (rather than a single comma)?


The dedicated hardware for comma alignment will align only when a single comma is used. How do I set up the transceiver so that it aligns on a particular series of commas?


Here is a simple example scheme: connect RXCOMMADET to ENPCOMMAALIGN and ENMCOMMAALIGN.  


In this case, realignment will occur only in the presence of a burst of commas, with the first comma causing ENPCOMMAALIGN and ENMCOMMAALIGN to be asserted, and subsequent commas causing realignment. A single comma should not cause realignment in this case. 


Some experimentation may be needed to determine how long a burst of commas must be in order for realignment to occur reliably, but it is probable that four or more commas will be required.

AR# 14606
日付 05/14/2014
ステータス アーカイブ
種類 一般