We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1468

XBLOX 5.x: Possible simulation problems if the labels are missing


Keywords: XBLOX, simulation, lablels

Urgency: Standard

General Description:

Designers may run into problems implementing or simulating XBLOX designs if
labels do not exist on all XBLOX buses. If labels do not exist on all
XBLOX buses, they may show up as undefined in simulation.


Always label buses associated with XBLOX symbols, including:

1. XBLOX buses between two XBLOX symbols.

2. XBLOX or non-XBLOX buses between an XBLOX and non-XBLOX symbol.

For example, if an FD8CE (non-XBLOX symbol) is driving a BUS_IF08 (XBLOX
symbol) and BUS_IF08 is in turn driving a SLICE (XBLOX symbol), add the
label 'COUNT[7:0]' with indices between the FD8CE and BUS_IF08 and add the
label 'SPLIT' between BUS_IF08 and SLICE without indices on it.
AR# 1468
日付 05/24/1999
ステータス アーカイブ
タイプ 一般