We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 14967

Virtex-II packaging - What does the NC (No Connect) mean? Can I use these pads for any purpose?


Are pads that are marked NC (No Connect) available for any purpose, such as for registers or for manufacturing purposes?


No, these pads/IOBs are not available for any use. For example, in the Virtex-II FF1517 pinout sheet, there are NCs for the XC2V4000 of the FF1517, and they are connected for the XC2V6000. There are more IOBs for the XC2V6000; as a result, there are no connects for the smaller device. When you open up that device in the FPGA Editor, you will see that they do not even exist.

AR# 14967
日付 05/14/2014
ステータス アーカイブ
種類 一般