UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1540

SYNPLIFY: How to convert tristate multiplexers to LUT multiplexers using the syn_tristatetomux attribute?

説明

Keywords: Synplify, VHDL, Verilog, SDC, syn_tristatetomux

Urgency: Standard

General Description:
How to convert tristate multiplexers to LUT multiplexers using
the syn_tristatetomux attribute?

Forces Synplify to analyze each net in your design driven by tri-state
drivers and convert the drivers into a mux. This is done if the number
of tri-states drivers on the net is less than the integer value specified
with this attribute.

Note: All drivers on the nets that could be converted to muxes must
be tri-state drivers, otherwise the conversion fails and a warning is issued.

ソリューション

SDC
---

define_attribute <top_module> syn_tristatetomux <integer>
AR# 1540
作成日 11/22/1996
最終更新日 04/24/2007
ステータス アーカイブ
タイプ 一般