We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15778

5.1isp1 Architecture Wizard - The DCM wizard does not ground the DSSEN port in a VHDL flow


General Description: 

In my VHDL flow, first time I run the DCM Wizard, the DSSEN pin is grounded correctly. However, if I re-open that existing XAW file in the DCM Wizard and save it again, the DSSEN pin is no longer grounded. VHDL synthesis will then fail because the DSSEN pin is floating.


This problem is fixed in the latest 5.1i Service Pack, available at: 

The first service pack containing the fix is 5.1i Service Pack 2.  


Alternately, you may work around the problem by manually connecting DSSEN to GND after generating the VHDL file.

AR# 15778
日付 05/08/2014
ステータス アーカイブ
種類 一般