We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 15868

5.1i iMPACT, 18V00 - "Programming Failed" is reported during a program/verify operation on a device chain set in concurrent mode


General Description: 

When a chain containing both an 18V00 PROM and FPGA(s) is programmed and verified using the iMPACT JTAG "Concurrent Programming" method, the software reports: 


"ERROR:iMPACT:1353 - ACD entry ERASE_PROGRESS_COUNT not found for device family xxx. 

EXCEPTION:iMPACT:ConstraintsManager.c:370:1.26 - Data not found. 

ERROR:iMPACT:636 - performOperation() failed!"


If you individually program and verify the devices (sequentially) on the same chain, the process works correctly. To set iMPACT for sequential mode, go to Edit -> Preferences and un-check the "Concurrent Mode" box. 


This problem is fixed in the latest 5.1i Service Pack, available at: 


The first service pack containing the fix is 5.1i Service Pack 2.

AR# 15868
日付 05/15/2014
ステータス アーカイブ
種類 一般