UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 161

How to see more of the error messages in PROcapture status window

説明

PROcapture has a status bar that is divided into two sections, the PROcapture
command line, and the status line. These two sections can be aligned either
side by side with the command line on the left, or one on top of the other
with the command line on the bottom.

ソリューション

The positioning of the status bar sections is controlled in the initialization
file called `workview.ini' found in the PROSER\STANDARD directory.

To position the command line section of the status bar to the left of the
status line section, comment out the line "DOUBLE_STATUS_WINDOWS" in the
`workview.ini' file by placing a vertical bar at the beginning of the line.

To position the command line section of the status bar below the status line
section, uncomment the line "DOUBLE_STATUS_WINDOWS" in the `workview.ini' file
by removing the vertical bar at the beginning of the line.

NOTE: Make all changes after closing PROcapture. Changes will only take
effect after you reopen PROcapture.
AR# 161
作成日 08/31/2007
最終更新日 10/01/2008
ステータス アーカイブ
タイプ 一般