We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17304

5.2isp2 iMPACT - iMPACT does not allow the addition of an 18v04 to a Boundary Scan chain (automatically selects XCF04 instead)


Keywords: iMPACT, 18v00, 18v04, XCF, platform, PROM, xcf04

Urgency: Hot

General Description:
iMPACT 5.2isp2 does not allow the selection of the 18v04 PROM for addition to a Boundary Scan chain. Instead, iMPACT automatically selects the XCF04S PROM.


This is the same problem as described in (Xilinx Answer 17239).

This problem is fixed in the latest 5.2i Service Pack, available at:
The first service pack containing the fix is 5.2i Service Pack 3.

A patch is available on the Xilinx FTP site to correct this problem. This patch should only be used with 5.2i Service Pack 2. Please view the archived README file for installation instructions at:
AR# 17304
日付 03/11/2005
ステータス アーカイブ
種類 一般