UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17386

7.x Synplify - How do I target radiation hardened (RadHard or QPro) Virtex parts in Synplify?

説明

General Description: 

As there are no radiation hardened (RadHard) device selections in Synplify, how do I target radiation hardened Virtex parts?

ソリューション

There are no RadHard parts listed in the GUI, but you can use the following mapping between RadHard and Virtex devices: 

 

Virtex QPro.......................Virtex Equivalent Part for synthesis and place and route 

XQVR300CB228................v300CB228 

XQVR600CB228................v600CB228 

XQVR1000CG560...............v1000CG560 

 

Only a -4 speed grade is available in radiation hardened parts, so be sure to choose -4 when targeting for the devices above. 

 

The data sheet for Virtex radiation hardened parts can be found at: http://www.xilinx.com/partinfo/ds028.pdf 

AR# 17386
日付 05/15/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加