We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 17690

LogiCORE SPI-4.2 (POS-PHY L4) v6.0 - Packets are improperly joined in 128-bit SPI-4.2 v6.0 Sink cores


General Description: 

When I use an SPI-4.2 v6.0 sink core, I see improper concatenation of the packets when SOP spacing is violated and if the first packet is not terminated properly with EOP. 


Example scenario that displays this problem

Sink Core receives on RDat:  

RDat: <90F9><0280><9120><0100><6001>  

RCtl: ...<1>.......<0>.......<1>.......<0>.......<1>  


- Packet 1 is sent on Channel 0F with 2 bytes and is not terminated properly (no EOP).  

- Packet 2 is sent on Channel 12 with 1 byte and is terminated properly.  

- Note that the SOP spacing is violated, and the first packet does not terminate on a credit boundary.  


When coming out of the back end, SnkFFData contains:  

<0280 0000 0000 0000 0100 0000 0000 0000>  


The SnkBusErr will be flagged to indicate the SOP spacing violation as expected, but the two packets are improperly concatenated and sent on Channel 0F.


To prevent this problem, avoid violating the SOP spacing rule, which requires 8 cycles between SOP indications. If you have packets smaller than 8 bytes, properly terminate them with an EOP.

AR# 17690
日付 05/15/2014
ステータス アーカイブ
種類 一般