UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 183

PROwave - Viewing an arbitrary set of signals as a bus in the waveform window

説明

Keywords: signals, vector, bus, busses, PROwave

Urgency: Standard

General Description:
How do I view an arbitrary set of signals as a bus in the waveform window?

ソリューション

Vectors must be made in PROsim for all busses and sets of arbitrary signals that you would like to view as busses in PROwave.

To view a set of signals as a bus in PROwave, perform the following steps:

1. In PROsim, create a vector for the set of signals that you would like to view as a bus in PROwave. The generic syntax is as follows:

vector <vector_name> <list_of_signals>

Example 1:
vector abus a[3:0]

Example 2:
vector abus a3 a2 a1 a0

Example 3:
vector arb a3 load enable a2

2. To add the vector to the waveform file, execute the wave command. The generic syntax is as follows:

wave <design>.wfm <list_of_signals_and_vectors>

Example 1:
wave calc.wfm abus

Example 2:
wave calc.wfm a[3:0]

Example 3:
wave calc.wfm arb a3 a2 a[1:0] abus

3. Open the waveform file in PROwave.
AR# 183
作成日 08/31/2007
最終更新日 02/24/2003
ステータス アーカイブ
タイプ ??????