We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 18525

Virtex-II Pro RocketIO - In the RocketIO Characterization Report, what does the XAUI jitter tolerance plot mean?


In the data sheet, why is the minimum jitter tolerance in Figure 2-2: "Compliance to XAUI Jitter Tolerance Specification" lower than the total and deterministic jitter tolerance specs? Which is correct?


They are both valid. The plot of XAUI jitter tolerance in the characterization report shows Sinusoidal jitter tolerance. The data sheet currently specifies only deterministic and total jitter tolerance. 


Sinusoidal jitter is unique as it is somewhat trackable by the receiver PLL. As seen in the graph, at very low modulation frequencies the receiver can track the slowly changing edge, even though this jitter would completely close a persistent eye scope shot.

AR# 18525
日付 05/16/2014
ステータス アーカイブ
種類 一般