UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1938

Foundation Schematic: Adding Attributes - LOC, X, etc.

説明

Keywords: foundation, schematic, attribute, loc, nodelay, fast, tnm

Urgency: Standard

General Description:
How do I add attributes using the Foundation Schematic Editor?

ソリューション

1

Some attributes require both a name and a value to be
entered. These include LOC and TNM. For a complete list of
Xilinx attributes, refer to Chapter 4 of the Libraries Guide.

Follow these steps to add an attribute with a value:

1. Double-click on the net or symbol you wish to place the
attribute on. If it is a net, click on the Attributes
button.

2. In the "Parameter Name" or Parameters -> Name field, enter
the name of the attribute (e.g. LOC).

3. In the "Parameter Description" or Parameters ->
Description field, enter the value of the attribute
(e.g. P12).

4. Click the Add button. The attribute will appear in the
list box.

The number of dots next to the attribute in the list box
determines what part of the attribute is displayed on the
schematic. Double-clicking on the parameter in the list
box will change the number of dots:

0 dots: Neither the Name nor Description will be displayed.
1 dot : The Description only will be displayed.
2 dots: Both the Name and Description will be displayed.


2

Some attributes only require a name (no value is needed).
These include FAST, NODELAY, and X. For a complete list of
Xilinx attributes, refer to Chapter 4 of the Libraries
Guide.

Follow these steps to add an attribute with no value:

1. Double-click on the net or symbol you wish to place an
attribute on. If it is a net, click on the Attributes
button.

2. In the "Parameter Name" or Parameters -> Name field, enter
the name of the attribute (e.g. FAST). Leave the
Description blank.

3. Click the add button. The attribute will now appear in
the list box without a value (e.g. "FAST=").

The number of dots next to the attribute in the list box
determines what part of the attribute is displayed on the
schematic. Double-clicking on the parameter in the list
box will change the number of dots:

0 dots: Neither the Name nor Description will be displayed.
1 dot : Only the Description will be displayed (*).
2 dots: Both the Name and Description will be displayed.

(*) In this case there is no Description, so nothing will be
displayed.
AR# 1938
作成日 02/20/1997
最終更新日 08/12/2003
ステータス アーカイブ
タイプ 一般