We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19745

6.2i ChipScope Pro - Inserter does not keep the setting for "trigger Ports used as data" when opened in Project Navigator


General Description: 

When adding a new Trigger Port using the ChipScope Pro Inserter within ISE, with "Trigger port used as data" set up, ChipScope Inserter does not keep the setting, when you Return to Project Navigator. 


If I open the ChipScope Inserter in Project Navigator and move to the Capture Parameters tab, the inserted ports are un-ticked.


This is a known issue. 


To work around it, apply the box tick again for the "trigger Ports used as data": 


1. Set the setting Trigger port used as data for the trigger port. 

2. Exit ChipScope Inserter. 

3. Open ChipScope inserter again. 

4. Apply the box tick again for the "trigger Ports used as data". 


This will be fixed in the next release.

AR# 19745
日付 05/16/2014
ステータス アーカイブ
種類 一般