UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 1980

5.2.x PPR - Relaxing PPR timespecs in xactinit.dat

説明

If even a few nets do not meet timespec, PPR under default settings will relax timespecs on all nets to a maximum value.
This can be avoided by making the following additions to the xactinit.dat file.

ソリューション

Minimal additions:
placer_4k_pa_goal_ratio = 1.0
pa_init_goal = 1.00

Other common additions to xactinit.dat:

placer_4k_pa_goal_ratio = 1.0
pa_init_goal = 1.00
loop_report_max = L
/ppr/report_paths = true
pa_pins_to_show = 6
pa_paths_to_show = 5
/ppr/placer_effort = 4
/ppr/router_effort = 4
/ppr/path_timing = true
/ppr/timing = forced_on
/*/*/plog_file_level = verbose
/*/plog_file_level = verbose
/*/*/plog_stdout_level = verbose
/*/plog_stdout_level = verbose
AR# 1980
作成日 08/31/2007
最終更新日 03/22/2000
ステータス アーカイブ
タイプ ??????