We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19986

6.3i sp1 iMPACT - The "load fpga" option fails when automatic checksum insertion is enabled and concurrent mode is set for XCFS PROM



The "load fpga" option does not work (the FPGA does not configure) when the automatic checksum insertion and concurrent mode preferences are enabled for XCFS PROM. When automatic checksum insertion is disabled, the option works; or if the device is set to sequential mode, the options works.


To work around this issue, "load fpga" should always be the last thing done on the PROM. For example, programing the usercode last will cause this problem.

AR# 19986
日付 05/16/2014
ステータス アーカイブ
種類 一般