UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 19990

6.3 System Generator for DSP - I cannot open Xilinx BlockSet by clicking the "+" ahead of the Xilinx BlockSet in Simulink, after installation. Why?

説明

General Description: 

I cannot open Xilinx BlockSet by clicking the "+" ahead of the Xilinx BlockSet in Simulink, after installation. Why? 

 

After I install System Generator 6.2 MATLAB r13 on MATAB 6.5, when clicking the "+" ahead of the "Xilinx Blockset" in the Simulink browse window, the Simulink browser halts with the message "loading: Xilinx Blockset" on the status bar. Then all MATLAB windows have no response.

ソリューション

There are several things that might cause this problem: 

 

1. Make sure that you can launch the COREGen tool. 

Start ->Programs -> Xilinx ISE -> Accessories -> CORE Generator 

 

If you cannot launch COREGen, please see (Xilinx Answer 16036)

 

2. Some third-party firewall software programs also cause problems. If you have a third-party firewall, you might want to consider trying the following: 

Reinstall ISE and the firewall software, and open all connection requests from MATLAB and ISE in the firewall software; then, System Generator works properly. 

 

3. For other troubleshooting techniques, please see (Xilinx Answer 18460).

AR# 19990
日付 05/16/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加