UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20037

LogiCORE SPI-4.2 (POS-PHY L4) v7.0 - PAR: "WARNING:Par:276 - The signal stat_syn_ver_pl4_snk_top0/U0/core0/pre0/sync0/dip0/_n0122(4) has no load"

説明

General Description: 

During the implementation phase of PAR, the following warnings occur: 

 

"WARNING:Par:276 - The signal stat_syn_ver_pl4_snk_top0/U0/core0/pre0/sync0/dip0/_n0122(4) has no load. 

WARNING:Par:276 - The signal stat_syn_ver_pl4_src_top_slave_trans0/U0/core0/train0/_n0100 has no load. 

WARNING:Par:276 - The signal stat_syn_ver_pl4_src_top_slave_trans0/U0/core0/train0/_n0081 has no load. 

WARNING:Par:276 - The signal stat_syn_ver_pl4_snk_top0/U0/core0/pre0/sync0/dip0/_n0122(4) has no load. 

WARNING:Par:276 - The signal stat_syn_ver_pl4_src_top_slave_trans0/U0/core0/train0/_n0100 has no load. 

WARNING:Par:276 - The signal stat_syn_ver_pl4_src_top_slave_trans0/U0/core0/train0/_n0081 has no load."

ソリューション

The signals in the warning messages are internal to the SPI-4.2 core, and they are unused; consequently, you can safely ignore these error messages.

AR# 20037
日付 05/16/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加