We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20404

6.3 System Generator for DSP - "Post-netlisting script failed - see postnetlist.log for details"


General Description: 

When any design in System Generator is opened and I try to generate the code by pressing the Generate button in the System Generator token, I receive "Post-netlisting script failed - see postnetlist.log for details".


This is a generic message. The most common cause of this error is that the environment variables are set incorrectly. The following variables need to be set under the Path in System Variables: 



XILINX = C:\Xilinx 


If there is a "\" at the end of the variable, the error message will still be displayed. Be sure that the XILINX environment variable appears as shown above (where C:\Xilinx is your install directory).

AR# 20404
日付 05/16/2014
ステータス アーカイブ
種類 一般