We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20489

7.1i XPower - Power is not temperature dependent


This solution applies to the following devices: Virtex-II/-II Pro, Spartan-3, Spartan-3E. When ambient temperature is changed, the thermal characteristics change, but overall power does not change. Why?


This issue is fixed in the ISE 8.1i release of the design tools. 


Temperature has a large impact on quiescent power; as leakage becomes worse, temperature rises. Temperature has a much smaller impact on dynamic power (~5%). At this time, XPower does not take temperature into consideration for its power estimates. All power is for typical room temperature (25C).

AR# 20489
日付 05/16/2014
ステータス アーカイブ
種類 一般