We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2051

5.2.1 XNFPREP - Errors 7822, 7854 from constraints file TIMESPEC


Keywords: .cst, xmake, tnm, xact-performance, constraint

Urgency: standard

General Description:
When creating a constraints file with a "timespec" line in it, XNFPREP errors 7822, 7854 may occur.


The diagnosis given in the error message should be checked first. The correct syntax for a TIMESPEC in a .cst file is:


This goes on a line by itself in a regular ASCII text file.
If you have the proper syntax, and the TNMs exist (abc, xyz in this example), then the problem may be that you have spaces in the TIMESPEC line. The following line may cause problems because of spaces:

timespec="TS01=FROM: abc :TO:xyz = 40";

Refer to (Xilinx Solution 1331) for more information on TIMESPECs in constraints files.
AR# 2051
日付 03/22/2000
ステータス アーカイブ
タイプ ??????