UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20598

Cadence Conformal - Using an OBUFTDS causes the register to be duplicated, and the equivalency checking might fail

説明

General Description: 

Using an OBUFTDS causes the register to be duplicated, and the equivalency checking might fail.

ソリューション

Conformal does not merge these registers automatically. The registers being merged are inverted and also the outputs of the flops feedback to the input to hold when CE is low. 

 

To work around this issue, add the following to the conformal command line: 

 

add instance equivalencies <inst_name> -invert <inst_name>/N -rev 

 

To find the instance name <inst_name>, you will have to parse through the equivalency netlist written out by NetGen to find the instance names of the X_FF. This is a problem only in the post-MAP and post Place and Route equivalency netlist. 

 

Future releases of Conformal might support this automatically.

AR# 20598
日付 03/05/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加