We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 20915

Config-Cables - When Platform Cable USB is disconnected from the board and reconnected, the Status LED goes out and does not re-illuminate


General Description: 

When I disconnect the Platform Cable USB from the board and reconnect it, the Status LED goes out and does not re-illuminate. Using iMPACT to perform any operation results in no action.



To work around this problem, disconnect the cable from the computer and reconnect.

AR# 20915
日付 05/19/2014
ステータス アーカイブ
種類 一般