When I use HW-130 programmer with TQ100 adapter in place, the programmer incorrectly identifies the adapter as "HW-133-PG84".
This is an issue with v4.0 of the HW-130 software and is fixed in the latest version of the HW-130 software:
http://www.xilinx.com/support/troubleshoot/htm_index/sw_programmer.htm
There should not be any problem continuing to use the TQ100 adapter; the programming of the device will not be affected.
| AR# 2129 | |
|---|---|
| 日付 | 05/08/2014 |
| ステータス | アーカイブ |
| 種類 | 一般 |