UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21347

LogiCORE SPI-4.2 (POS-PHY L4) v7.2 - SPI-4.2 v7.x Source core does not send data when DataMaxT < 8

説明

General Description: 

When I set the static configuration signal DataMaxT or the GUI option "Number of Data Cycles before Training" to 1 to 8, the Source Core sends periodic training patterns after going in frame instead of sending data or idles. If DataMaxT = 0, this problem does not occur, and the core never sends periodic training patterns.

ソリューション

This core issue occurs when "Number of Data Cycles before Training" is set to 1 to 8. If possible, set "Number of Data Cycles before Training" to a value greater than 8, and the core will function correctly.

AR# 21347
日付 05/19/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加