UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21765

7.1i iMPACT CoolRunner XPLA3 - Programming/Blank Check of XPLA3 devices fail with "JedecReader.c:119:1.42" or "iMPACT:1779 - MISR" error

説明

General Description: 

When I am programming a CoolRunner XPLA3 device, iMPACT displays the following errors: 

 

"EXCEPTION:iMPACT:JedecReader.c:119:1.42 - Data mismatch." 

"ERROR:iMPACT:636 - performOperation() failed!Device # selected" 

"ERROR:iMPACT:1779 - Can't find this register MISR" 

"EXCEPTION:iMPACT:BsdlStorage.c:509:1.66.26.1 - Data not found." 

 

Also, during a Blank Check operation, iMPACT fails with the following error message: 

 

"Failed at address, 0'1' : Part is not Blank"

ソリューション

The error is caused by a problem with the Boundary Scan Description (BSDL) file. 

 

The proper BSDL files can be downloaded from the link below: 

 

http://www.xilinx.com/txpatches/pub/coolpld/xpla/sr21765.zip
 

To install, simply extract the" .ZIP" archive to your XILINX directory. If using WinZip, ensure that "Use Folder Names" is enabled. This will overwrite 3 BSDL files: 

 

%XILINX%/xpla3/data/xcr3256xl.bsd 

%XILINX%/xpla3/data/xcr3384xl.bsd 

%XILINX%/xpla3/data/xcr3512xl.bsd

AR# 21765
日付 05/08/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加