We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 21997

LogiCORE SPI-4.2 (POS-PHY L4) Lite v3.0 - GUI incorrectly sets sink almost full mode.


General Description: 

In the GUI, there is an option to choose the Sink Fifo Almost Full mode: 

... Send Satisfied on All Channels 

... Send Framing 

... Send Current Status 


When generating the core, this setting is interpreted incorrectly. The behavior of the core in the H/W and the simulation will show incorrect behavior when Sink Fifo as reached the Almost Full condition.


To work around this issue, adjust the static configuration signal by hand in the wrapper VHDL or Verilog file. 


In the wrapper file, search for following comment: 


// The following signal instantiations are the User Configuration signals. 

// The user may need to modify these signals to meet their particular 

// application 



Change the parameter "FifoAFMode" with the following correct value. 


The correct value is as follows:  

"Send Framing" should set the parameter to 00 

"Send Satisfied" should set the parameter to 01 

"Send Current Status" should set the parameter to 10 or 11

AR# 21997
日付 05/19/2014
ステータス アーカイブ
種類 一般