We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2241

** OBSOLETE ** M1.5 LOGIBLOX: LogiBLOX will not save vendor information for vendor "Other"


Keywords: logiblox, vendor, other, bus notation

Urgency: standard

General Description:
If you choose Vendor=Other in the LogiBLOX Setup menu,
LogiBLOX will notwrite the Vendor and Bus notation information
into the logiblox.ini file. This implies that you will need to
re-enter this information every time LogiBLOX (lbgui) is


As a workaround, you may choose the predefined Vendor setting
whose bus width delimiter matches that required by your
design entry tool. For example, if you need the bus delimiter
format to be set to "B", you should choose either Cadence
or Synopsys as the Vendor.

For your reference, this is the correspondence between
vendor and bus delimiter settings:

" is used by Cadence and Synopsys options

"B(I)" is used by Mentor option

"BI" is used by Viewlogic option

This problem has been fixed in the 1.4 release.
AR# 2241
日付 03/01/1999
ステータス アーカイブ
種類 一般