We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!


AR# 2296

*Obsolete* 2.1i JTAG Programmer - ERROR:basut - no functional test vectors in JEDEC file


Keywords: Functional Test Vectors, TMV, 9500

Urgency: Standard

General Description:
When attempting to do a Functional Test with the JTAG Programmer, the following error may be issued:"ERROR:basut - there were no functional test vectors in JEDEC file."


In order for functional test vectors to be written into the JEDEC file, the <design>.TMV file must reside in the same directory as the <design>.VM6, AND must have the same <design> name as the .VM6 file.

If running from the Design Manager, this means that the ".TMV" file should be copied into the ...\XPROJ\VER*\REV* directory, where VER* and REV* represent the current Version and Revision being compiled.
AR# 2296
日付 09/26/2005
ステータス アーカイブ
種類 ??????