We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24354

8.2.03i ChipScope Pro - I cannot connect to my cable in ChipScope on Linux. Why?


When using ChipScope Analyzer on Linux in 8.2.03i, you might be unable to connect to the JTAG cable. If "cs_server.sh" is launched, it will report that "init.tcl" could not be found and that: 


"This probably means that Tcl was not installed properly."


To work around this issue, download the ".zip" file below. First back up both "cs_server.sh" and "analyzer.sh", and then replace them with the files in the ".zip". 



This issue is fixed in ChipScope 8.2.04i. This problem did not exist in ChipScope 8.1 when run on Red Hat Enterprise 3.0 (32-bit).

AR# 24354
日付 05/21/2014
ステータス アーカイブ
種類 一般