UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2472

Hardware Debugger: Setting up printer on Unix Workstations

説明

Key Words: printer, workstation, setup

Urgency: Standard

General Description:
How do I setup a workstation version of the Hardware Debugger
to print?

ソリューション


1. Open a Waveform window and select PRINT on main menu.
A Print Dialog is displayed. If you see your printer
name shown on the dialog, you don't need to go further.
Just make sure that "[] Print to File" is not checked
otherwise your waveform output will go to a file. To
setup a new printer continue to step 2.

2. Select the SETUP... button on the Print Dialog to
invoke the Printer Setup Dialog.

3. Check "[] Printer Specific" and select the
Install... button to invoke Printer Install dialog.

4. Select Add Printer... to bring up another
Printer AddOn dialog and if the printer's port is not
defined on the list, you need to select Define New Port...

5. On the New Port dialog, select Spooler to add all
available printers. Choose Cancel to go back to
Printer Add On dialog and select the printer model and
the Port on the lists. Select Add Selected to add the printer
to the system. You can 'Dismiss' all dialogs to return
back to Printer Setup dialog. In the Printer Setup
dialog, select Options to select the newly installed
printer.
AR# 2472
作成日 06/23/1997
最終更新日 11/10/2004
ステータス アーカイブ
タイプ 一般