We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 249

BBS: Getting control characters on screen in graphics mode


When you are logged on to the BBS you have a choice of being in
Graphics mode or pure ASCII text mode (typing "M" toggles between the
two modes). Graphics mode will give you color menus and graphics.
If getting a lot of control characters on his/her screen
when in Graphics mode, check the communications software's
terminal setting--it should be set to either ANSI or BBS-ANSI.

You must also have ansi.sys called out in you config.sys file. If
it is not, add the line and reboot the machine to allow the change
to take affect.

AR# 249
日付 11/05/1996
ステータス アーカイブ
タイプ ??????