We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24927

ChipScope Serial I/O Toolkit 9.1i - Why is the PRBS data in my IBERT GTP inverted?


In ChipScope versions 8.2.04i, 9.1.01i, and 9.1.02i, the PRBS data that is generated is inverted from the ITU-T specification O.150. This inversion occurs at the transmitter and at the receiver. This problem affects only the PRBS patterns; the user patterns are not inverted.


To work around this issue in the affected versions, follow these steps: 


1. Using the IBERT console, select the PRBS on the GTP under test. 

2. Invert the TX output channels of the GTP under test. 

3. Invert the RX input channels of the GTP under test. 


This issue is fixed in ChipScope 9.1i Service Pack 3.

AR# 24927
日付 05/21/2014
ステータス アーカイブ
種類 一般