UPGRADE YOUR BROWSER

We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 24958

ML410 - Why is the contrast poor on the LCD panel?

説明

Why is the contrast poor on the LCD panel?

ソリューション

If you observe poor contrast on the LCD panel, P/N AND94GST, shipped with your ML410 and you have a RoHS version of the LCD panel (identified by RoHS notation on the part number sticker located on the back of the LCD unit), make the following adjustments. Otherwise, no action is required  

 

NOTE: The contrast voltage setting of the RoHS version of the LCD panel differs from the non-RoHS version even though the manufacturer maintains a single part number for both versions. 

 

Adjust the LCD contrast voltage by changing resistor R409 as follows: 

 

From: 

100 ohms, 0603 package, 1% tolerance, 1/16W 

 

To: 

249 ohms, 0603 package, 1% tolerance, 1/16W 

 

NOTE: R409 is located on the back side of the ML410 board near the LCD panel J13 header connection.

アンサー レコード リファレンス

関連アンサー レコード

Answer Number アンサータイトル 問題の発生したバージョン 修正バージョン
38093 ML410 - 既知の問題/リリース ノート/マスタ アンサー レコード N/A N/A
AR# 24958
日付 05/21/2014
ステータス アーカイブ
種類 一般
このページをブックマークに追加