We have detected your current browser version is not the latest one. Xilinx.com uses the latest web technologies to bring you the best online experience possible. Please upgrade to a Xilinx.com supported browser:Chrome, Firefox, Internet Explorer 11, Safari. Thank you!

AR# 2772

FATAL_ERROR:basnc:basncsignal.c:262:1.61 mapping with -k switch


FATAL_ERROR:basnc:basncsignal.c:262:1.61 - Could not find a bel for a signal on pin C1 of comp u0/u1/u1/modgen_0_ax_duplicate_name_0_CINt.

The error is dependent on use of the -k switch
(map to 5-input functions)


For this particular case, map runs okay when the -k switch
is not used. There are other known cases of this Fatal Error
that are unrelated to the -k switch. If the error message
mentions "pin C1" there is a good chance the the -k switch
is involved.
AR# 2772
日付 10/06/2008
ステータス アーカイブ
種類 一般